Sometimes, you just want a kickstand for your Astor bicycle. Installation is easy, and takes less than 10 minutes.

Your kickstand order should come with a kickstand, bolt, and a top plate.

Installation requires a common 14mm wrench.


In front of the rear wheel and behind the pedals, there is a small plate.

Slide the kickstand into the plate from below.


Place the top plate above the two tubes and insert the bolt


Tighten the 14mm bolt, remember righty tighty



Congratulations, you installed your kickstand! Below is what your kickstand should look like, if you have any issues don't hesitate to reach out to us at